Residential laundry · Sydney-wide
Vented, condenser and heat-pump dryers. Most faults — not heating, drum not turning, taking too long, burning smell — are repairable.
Common faults we fix
If your symptoms aren't on this list, call us anyway — these are the common ones, not the only ones.
Not heating
Cold air, clothes still wet. Usually a heating element, thermal fuse or thermostat — most are replaceable.
Drum won't turn
Motor runs but the drum doesn't spin, or the dryer is silent. Typically a belt, motor capacitor or door switch.
Taking too long to dry
Clothes coming out damp after a full cycle. Often a blocked lint filter, blocked ducting, or a failing heating element.
Burning smell
A burning smell usually means lint has built up inside the cabinet or ducting — this is a fire risk. Stop using the dryer and call us.
Noisy operation
Grinding, squealing or rumbling sounds. Worn rollers, bearings, or a stretched belt are the usual culprits.
Won't start
Nothing happens when you press start. Could be the door switch, thermal fuse, or control board.
Vented, condenser or heat-pump?
Telling us what kind of dryer you have lets us narrow the diagnosis on the phone and bring the right parts on the first visit.
Vented
Hot moist air is pushed outside.
The most common and the cheapest to fix. Simple mechanically — heating element, drum, motor, exhaust ducting. Slow drying is almost always blocked ducting or a tired element.
Common faults
Condenser
Moisture is collected internally.
No external ducting needed — water goes to a reservoir or drain. Slightly more complex, with a condenser unit that needs cleaning regularly to maintain performance.
Common faults
Heat-pump
Lower energy, lower temperature.
The most efficient and the most modern — uses a refrigerant cycle instead of a resistive element. Drying is slower but kinder on fabric. Repair is more specialised and parts cost more.
Common faults
Burning smell? Stop using it.
Lint that escapes the filter builds up inside the cabinet, around the heating element, and through the ducting. It's one of the most common causes of dryer fires. If you can smell burning, don't run another cycle — give us a call and we'll inspect before you use the dryer again.
Warning signs
Before you call
A bit of information up front means we can give you a more accurate diagnosis and price range over the phone.
Have the make and model handy — usually on a sticker inside the door or behind the lint filter.
Note the symptom — not heating, not turning, taking too long, smell, noise.
Tell us whether it's vented, condenser or heat-pump if you know.
If there's a burning smell, stop using it and call before running it again.
Not sure if we cover your suburb? Give us a call — we cover more areas than the list below and we'll tell you straight up if we can help.
How a repair goes
Call or message
Tell us the make, model and symptom. We'll talk through what it's likely to be and give a price range.
We come out
We book a time and turn up with the common parts for that fault.
Final price before we start
We confirm the diagnosis on-site, give you the final price, and only proceed once you've agreed.
Tell us what's happening and we'll talk you through whether it sounds repairable, what it usually costs, and when we could get to you.
Hours
Direct
